![\"\"](\"https:\/\/www.entapano.com\/shop-en\/wp-content\/uploads\/2024\/04\/127ac471-8638-4578-91b2-e8c6f0cdc5e9.__CR290970600_PT0_SX970_V1___.jpg\")
<\/p>\n<\/p>\n
[Product Features]<\/strong> Accessories<\/strong> IP68-compliant cube-shaped waterproof case<\/strong> Seamless frame<\/strong> O-rings<\/strong> Bottom panel with tripod screw holes<\/strong> Removable and Replaceable Panels<\/strong> The main feature of the waterproof cube case is its system of interchangeable panels.<\/p>\n This system takes advantage of the cube shape, making it possible to attach and detach panels on all six sides of the cube.<\/p>\n If a panel is damaged or cracked, it can be repaired to its original state by replacing only that panel.<\/p>\n The panels can also be customized to suit the intended use, for example, a camera can be built in, safety wires can be attached to prevent dropping, or connectors can be attached to connect cables between the inside of the case and the outside.<\/p>\n Panels for Customization<\/strong> Waterproof Connector Panel<\/strong> Wire Attachment Panel<\/strong> Waterproof property can be maintained by attaching a cable gland to the holes drilled in the panel and passing the wires through it.<\/p>\n Panel with tripod hole<\/strong> Heat pipe panel<\/strong> Panel for Raspberry Pi pedestal<\/strong> Connector panel with Raspberry Pi pedestal<\/strong> Panel for expansion (125 only)<\/strong> This convex panel solves this problem.<\/p>\n
\nCube-shaped waterproof case.
\nAll six sides of the case are removable, and the panels can be replaced to customize the specifications to suit the application.<\/p>\n
\nAluminum frame
\nAcrylic panel (5 sides)
\nAluminum panel (with tripod hole for bottom) 1 side<\/p>\n
\nThis cube-shaped waterproof case (enclosure) complies with IP68 dustproof and waterproof performance.
\nIt features a high degree of customizability, allowing you to change the specifications to suit your application by replacing the panels.
\nIt can be installed outdoors or submerged underwater for measurement and observation.<\/p>\n![\"\"](\"https:\/\/www.entapano.com\/shop-en\/wp-content\/uploads\/2024\/04\/1587844c-4ec1-4020-acab-15dd26f064fc.__CR00970600_PT0_SX970_V1___-2.jpg\")
<\/p>\n
\nOne of the reasons for the high waterproof performance is the seamless one-piece frame. It is manufactured by die-cast molding.<\/p>\n
\nO-rings under each panel prevent water from seeping through the panel.<\/p>\n
\nThe panels used on the bottom have standard screw holes (1\/4\u201c-20, 3\/8\u201d-16) for tripods and other photographic equipment.<\/p>\n
\nAll six panels can be removed and replaced.
\nYou can customize the panels to suit your needs or replace only the damaged panels.<\/p>\n![\"\"](\"https:\/\/www.entapano.com\/shop-en\/wp-content\/uploads\/2024\/04\/ff575bcd-0ba7-4d2a-8822-941d41b867f5.__CR00970600_PT0_SX970_V1___.jpg\")
\nCustom panel system] that allows panels to be interchanged according to the application.<\/strong><\/p>\n
\nDome Panel
\nThis panel with a dome cover is useful for installing a camera inside the case or checking instruments.
\nThe height of the dome can be selected according to the size of the camera.<\/p>\n
\nThis panel is for installing a waterproof connector, which is useful for connecting cables inside the case.
\nThe panel has pre-drilled holes for waterproof connectors.<\/p>\n
\nThis panel is processed so that wires can be attached to the aluminum panel.
\nThis panel can be used to attach wires to prevent the case from falling or being washed away when the case is installed at a high place or in a river, etc.<\/p>\n
\nThis panel is for the bottom, but can be used on multiple sides to provide expandability, such as attaching a magic arm or other photographic equipment using the camera screw holes drilled in the panel.<\/p>\n![\"\"](\"https:\/\/www.entapano.com\/shop-en\/wp-content\/uploads\/2024\/04\/d2f9bbb5-4751-4a8d-924a-ca8407107b4e.__CR00970600_PT0_SX970_V1___-2.jpg\")
\nCustomized Panel for Raspberry Pi<\/strong><\/p>\n
\nThis panel can be connected to the heat pipe for RASPIE 4\/5. This panel can dissipate heat generated by RASPIE to the outside for cooling, preventing temperature rise even in a sealed case and stabilizing operation.
\nIncludes a pedestal and heat pipe for installing Raspberry Pi.<\/p>\n
\nPanel with a pedestal for installing the Raspberry Pi main unit.<\/p>\n
\nPanel for Raspberry Pi pedestal with holes for attaching waterproof connectors for cable connection to the Raspberry Pi inside the case.
\nWaterproof connectors for HDMI, USB-C, USB 3.0, RJ45, etc. can be attached.<\/p>\n
\nWhen using a heat pipe panel for Raspi in a 125 size case, USB 3.0 or RJ45 ports cannot be used because the panel and cable head interfere with each other.<\/p>\n